drag racing hood scoops (2024)

Drag Racing Hood Scoop - For model kit / Custom diecast / RC
cults3d

(Only the pieces you see on pictures) 1/24 Scale (Can be rescaled) Model 1: 18,72 x 51,31 x 14,24 mm Model 2: 18,72 x 51,31 x 14,24 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part...

DRAG RACING HOOD SCOOP SCOOP FORMULA - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

(Only the pieces you see on pictures) 1/12 Scale: Adjust the size to your model (Can be rescaled) Size : 20,08 x 77,59 x 8,02 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should...

DRAG RACING HOOD SCOOP - TRIANGLE - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

(Only the pieces you see on pictures) About 1/24 Scale: Adjust the size to your model (Can be rescaled) Size : 18,12 x 34,73 x 14,15 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part...

Drag Racing Hood Scoop 2 - For model kit / Custom diecast / RC
cults3d

(Only the pieces you see on pictures) 1/24 Scale (Can be rescaled) Model 1: 18,75 x 52,00 x 21,51 mm Model 2: 18,71 x 52,00 x 21,46 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part...

DRAG RACING HOOD SCOOP Pack 2 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 20.28 x 46.78 x 13.41 mm Model 1: 21,17 x 46,71 x 16,18 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 3 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 14.62 x 30.16 x 24.09 mm Model 1: 14,62 x 31,38 x 19,95 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 4 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 18.04 x 25.15 x 20.22 mm Model 1: 16,78 x 25,22 x 25,50 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP PACK 8 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Size 1: 19,61 x 49,98 x 11,65 mm Size 2: 19,61 x 53,70 x 13,37 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 1 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 19.28 x 43.47 x 14.28 mm Model 1: 20,28 x 46,78 x 13,41 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 6 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 19.44 x 24.29 x 6.90 mm Model 1: 19,44 x 24,29 x 5,40 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 7 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 33.87 x 57.11 x 14.47 mm Model 1: 32,55 x 57,11 x 17,28 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP Pack 5 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 15.08 x 21.57 x 11.54 mm Model 1: 14,14 x 21,62 x 10,82 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued,...

DRAG RACING HOOD SCOOP 3 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Adjust the size to your model (Can be rescaled) Model 1: 20,33 x 49,08 x 17,58 Model 2: 20,32 x 49,08 x 17,58 For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part should be glued, model´s...

DRAG RACING HOOD SCOOP - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

About 1/25 . Scale it to fit your modelSize: 18,36 x 52,03 x 14,41 mmFor commercial use of the files, contact me firstAttention:-For experienced model builder-Take care when you remove the supports-Parts should be glued.-Not recommended...

Drag Racing vintage Hood Scoop - For model kit / Custom diecast / RC / Slot
cults3d

(Only the pieces you see on pictures) 1/24 Scale (Can be rescaled) Model 1: 18,36 x 26,15 x 7,92 mm Model 2 Part A: 16,01 x 26,01 x 3,60 mm Model 2 Part B: 18,36 x 24,02 x 5,48 mm Model 3: 26,94 x 36,86 x 10,61 For commercial use of the files,...

DRAG RACING VINTAGE HOOD SCOOP 2 - FOR MODEL KIT / CUSTOM DIECAST / RC / SLOT
cults3d

(Only the pieces you see on pictures) 1/24 Scale (Can be rescaled) Model 1: 18,63 x 36,99 x 10,35 mm Model 2: 18,63 x 36,99 x 12,21 mm For commercial use of the files, contact me first Attention: -Check the size of your model before printing -Part...

DRAG RACING VINTAGE HOOD SCOOP PACK 1/16 - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

About 1/16 Scale (Could be rescaled) 1 mm thick Size: 22.49 x 62.27 x 21.55 mm 22,49 x 69,26 x 21,55 mm 22,49 x 58,74 x 21,55 mm For commercial use of the files, contact me first Attention: -Take care when you remove the supports -Adjust size to fit...

DRAG RACING VINTAGE HOOD SCOOP - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

Scale it to fit your modelSize: 15,00 x 38,83 x 10,47 mmFor commercial use of the files, contact me firstAttention:-For experienced model builder-Take care when you remove the supports-Parts should be glued.-Not recommended for kids...

DRAG RACING VINTAGE HOOD SCOOP - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

1/25 scale - Thin file, be carefull with supports (can be rescaled for bigger scales)Size: 27,40 x 45,03 x 12,90 mmFor commercial use of the files, contact me firstAttention:-Take care when you remove the supports-Parts should be glued.

DRAG RACING VINTAGE HOOD SCOOP PACK - FOR MODEL KIT / CUSTOM DIECAST / RC
cults3d

1/25 scale - Thin file, be carefull with supports (can be rescaled for bigger scales)Model 1: 19,40 x 38,40 x 9,55 mmModel 2: 16,06 x 41,33 x 8,27 mmFor commercial use of the files, contact me firstAttention:-Take care when you remove the...

Hood scoops
myminifactory

Made these hood scoops to house components for the RVjet or to compliment the airbrkaes thatI previuosly uploaded. They are desined to be curved to fit the surface of the RVjet....Printed usingFiber Force filament.

Revised RVjet hood scoops
thingiverse

A revised version of my original removable hood scoops for the RVJet Will upload pictures once I have them installed.

Sunoco Hood Scoop Pro Mod Outlaw Drag
cults3d

Designed from scratch is a Sunoco Hood Scoop to suit drag cars, hollowed under side for engine clearance and flat bottom to shape to your hood. High in detail, ideal for scale modeling (currently in 1/24 and 1/25 scale). Perfect for those drag...

NHRA Drag Racing
thingiverse

nhra drag racing

Axial SCX10 Jeep JK - Hood Scoops
cults3d

some hood scoops for jeep rubicon. ...bolt them onto the body

Axial SCX10 Jeep JK - Hood Scoops
thingiverse

some hood scoops for jeep rubicon. ...bolt them onto the body

drag racing steering wheel
cults3d

3d modeled drag racing steering wheel, with buttons

Curved hood scoops for the RVjet
thingiverse

I also change the length and look of the actually scoop, which I got the idea for that portion from Boopidoos original hood scoops. Thanks Boopidoo. These are a little harder to print as they have multiple curves. I have printed them in all different...

Drag Racing Game
thingiverse

This is an old drag racing game I made years ago in TinkerCAD (The very first thing I ever modeled, actually) I can basically guarantee that it won't work as intended but I figured I would upload it anyways in case anyone wants to improve upon it. ......

Drag Racing Christmas Tree
thingiverse

3D Printed Drag Racing Christmas Tree i Designed in CAD. The Pre-stage and Stage lights are Designed to hold 3mm led's.The rest of the lower lights are all designed to take 5mm led's.The bottom piece is designed to hold two AAA Batteries.I used a...